Filter
Top Products
Getting Started
17
ViewStation User’s Guide
5. Wrap the cable tie that came with your ViewStation around all of the cables
on the back of the unit so they don’t get tangled. Slide one end of the cable
tie through the plastic octagonal piece and then attach the octagonal piece
to the back of the television monitor. The adhesive dots can be used to
attach the QuickStart booklet to the side of your television monitor.
6. Put the batteries in the remote control.
7. Turn on the television monitor and ViewStation. Make sure the television
is set to video 1 or 2. The following screen allows you to select the language
that you would like to see on the ViewStation. Press the arrow buttons on
the remote to highlight a language and then press the SELECT button on
the remote to select the language. If the remote is not working properly,
make sure the batteries have been installed.
TIP:
You can press the INFO button on the remote from the
Language screen for system information.