Filter
Top Products
Placing and Answering Calls
35
ViewStation User’s Guide
3. Use the numeric keypad on the remote to enter the number you want to dial.
If you are dialing within your PBX system, you only need to dial the last
four digits of the number. The number format is the same as if you were
placing a call from your telephone. If you want to delete a digit, press the
left arrow button on the remote. To delete an entire phone number, use the
arrow buttons to highlight the Clear button on the screen.
4. To end the video call, press the CALL•HANG-UP button on the remote.
Highlight the Disconnect Video & Speakerphone Call icon and press the
SELECT button on the remote. Since you initiated the call combination
with the telephone call, you cannot disconnect from the call and remain in
the video call. To stay in both calls, highlight the Stay In Call icon and press
the SELECT button on the remote.
TIP:
To jump from the main calling screen to the Video Phone
screen, press any digit between 0 and 9 on the numeric
keypad of the remote.