Filter
Top Products
Recording
59
Tally
Interval Timer
Rec Time OFF
JLIP ID NO. 0 7
ON
OFF
Tally Light
To Turn the Tally Light ON or OFF
1. Follow steps 1-4 on the previous page.
2. Press or on the mode select dial
to highlight Tally.
3. Press on the mode select dial to start
Tally flashing.
4. Press or on the mode select dial
to turn the tally light ON or OFF.
• Select ON to have the tally light
turn on during recording.
• Select OFF if you do not want the
tally light to light.
5. Press to stop Tally flashing.
6. Press MENU to exit the menu.
Set the JLIP ID NO.
The camcorder has a JLIP (Joint Level Interface Protocol) connector that may be
used in the future to connect a device, such as a home computer.
To Select a JLIP ID NO.
1. Follow steps 1-4 on the previous page.
2. Press or on the mode select dial
to highlight JLIP ID NO.
Tally
Interval Timer
Rec Time OFF
JLIP ID NO. 0 7
ON
OFF
3. Press on the mode select dial to start
JLIP ID NO. flashing.
4. Press or on the mode select dial
to a number from 01 to 99.
5. Press to stop JLIP ID NO. flashing.
6. Press MENU to exit the menu.