Filter
Top Products
93
Optional Accessories
Mounting the camcorder on a tripod,
such as AC088, will keep the camcorder
steady and produce excellent video
results.
This tripod’s fluid-effect head provides
smooth camera pan and tilt. The quick-
release mount makes it easy to attach or
remove the camcorder. The grooved,
tubular 3-section leg design folds down to
26" when not in use. Rubber feet allow
for sure footing.
Cautions: Before using a tripod, make sure it is
stable enough to hold the camcorder without
falling over. Do not transport the camcorder
attached to the tripod.
When attaching your camcorder to a tripod, be
careful not to force the tripod screw into the
camcorder’s tripod mounting hole.
The tripod screw should not protrude into the
camcorder more than approximately three-eighth
(3/8) inch. Forcing the screw could damage the
mounting hole on the bottom of the camcorder.
Using the Optional AC088 TripodFB1260 and FB120 Rechargeable
Batteries
These rechargeable nickel-cadmium
batteries are designed specifically for long
life. The FB1260 is the same battery that
came packed with your camcorder. The
FB120 powers your camcorder twice as
long as the FB1260 (with video light off –
depending on how much you use zoom
and pause). Both can be recharged with
the AC adapter/charger that came with
your camcorder.
CPS91 AC Battery Charger
The CPS91 battery charger plugs directly
into an AC outlet and charges the FB1260
and FB120 camcorder batteries. Because
the CPS91 operates on 100-240 Volts,
50/60 Hz, it can be used virtually
anywhere in the world. A plug adapter
may be required in some countries.
Charging takes approximately seven hours
for the FB1260 (1-hour battery) and 13
hours for the FB120 (2-hour battery).
CHARGE
MENU
16X9
BACKLIGHT
AUTO
MANUAL
FRONTLIGHT
AE MODES
EIS
FADE
WIPE
DATE/
TIME
PHOTO
EFFECTS
P
U
S
H
F
O
C
U
S
All specifications and
descriptions of accessories are
subject to change without notice.