Filter
Top Products
74
Recording
Built-In Color Enhancement Light
The built-in color enhancement light will automatically add more light when needed.
The POWER switch must be in CAMERA to operate the video light.
MENU
16X9
BACKLIGHT
AUTO
MANUAL
FRONTLIGHT
AE MODES
EIS
FADE
WIPE
DATE/
TIME
PHOTO
EFFECTS
P
U
S
H
F
O
C
U
S
Built-In Video Light
LIGHT OFF•AUTO•ON
Button
(continued on next page)
To Use the Light
Set the LIGHT OFF•AUTO•ON switch.
• Set to ON to turn the light on.
Note: We recommend you set white
balance to the indoor mode ( ) when
using the light.
• Set to AUTO to have the light come on
automatically when the camcorder
senses there is insufficient light for the
best recording.
Notes: If the lighting condition is unstable
the light may turn on and off. Set the light
to ON or OFF.
The light may stay on during high speed
shutter recording.
• Set to OFF to turn the light off. Turn
the light off when you are not
recording to save battery power.
Note: When the light is turned on, the
camcorder may turn off if the battery’s power
is low even though the battery level indicator
is not flashing.
Cautions:
Do not operate the video light closer
than one foot to people or other
objects.
The video light becomes very hot. Do
not touch it during operating or right
after using it. Serious injury may
result.
Do not place the camcorder in a
carrying case right after using the light.
Never operate the video light close to
flammable or explosive material.