Filter
Top Products
32 LDK 8000 HDTV camera system User’s Guide (v3.0)
Chapter 3 - Configurations
3.4 SportCam with high-speed Base Station
To obtain a high-speed output, the SportCam must be connected to the high-speed TriaxHD
Base Station (LDK 4506). The connection between the SportCam and the Base Station uses
the same Triax cable as the other configurations and operational control uses the same C2IP
network and units. The high-speed TriaxHD Base Station supplies a dual-phase high-speed HD
signal for a recording system.
Figure 3-4. SportCam with SuperXpander and high-speed TriaxHD Base Station.
Camera Base Station
Harddisk
recorder
High-speed
HD Base
Station
Cross over
Ethernet cable
Audio
out
Video
out
Power
in
TP
in
External
video in
SportCam + SuperXpander
RS 422
Playback
Controller
Digital dual phase
(2x SDI 1.5 Gb/s)
Standard PGM output
(270 Mb/s) for slow
motion playback
Composite output
for monitoring
OCP 400