Filter
Top Products
70 LDK 8000 HDTV camera system User’s Guide (v3.0)
Chapter 5 - Operating instructions
5.11.2 Access control
The owner’s card or the PIN code is used to access special set-up and security features of the
camera. Inserting the owner’s card into the associated camera always gives direct access to
the Security menu (PIN code is not required). If you select the Security menu without this card
inserted, you must enter the correct PIN code to gain access to this menu.
PIN code
The PIN code of the camera can be viewed and changed in the Security menu. The camera's
PIN code when it leaves the factory is set to 0000. It is strongly advised that this code be
changed by the owner on receipt of the camera. This ensures added protection against
unaurthorised access to the Security menu.
5.11.3 Camera card slot
Insert your camera card into this slot with the chip on the card facing the front of the camera.
Push the card home until it fits snugly. A camera card is not required for normal operation of
the camera.
Figure 5-14. Camera card slot
☞
Note
Only use an original camera card. Store the owner’s card in a safe place.
☞
Note
An LDK 8000 SportCam will only read LDK 8000 SportCam cards.
CAMERA CARD