Filter
Top Products
48 LDK 8000 HDTV camera system User’s Guide (v3.0)
Chapter 5 - Operating instructions
5.5 Viewfinder preferences
Set up the viewfinder according to your own preferences; adjust viewing parameters, select
markers, message boxes and on-screen display times in the VF menu.
Figure 5-4. Viewfinder controls
5.5.1 Viewfinder picture quality
Adjust the Brightness and Contrast controls according to your preferences. If you wish, use
the Crispening (peaking) control to adjust the sharpness of the viewfinder picture (reduce
the crispening when the gain is set to +++).
The dioptre of the viewfinder can be adjusted to suit your eyesight by turning the Dioptre ring.
The range of the dioptre is +1 to -3.
5.5.2 Video level indication
Switch on the zebra function so that you are alerted in the viewfinder by a Zebra pattern in
areas where high video levels occur. This diagonal line pattern warns you that the area affected
has risen above a predetermined level of the full scale video exposure value. Go to the VF
menu to set the video levels at which the zebra function works.
5.5.3 Tally indicators
The red Tally indicator at the front of the viewfinder and at the rear of the carrying handle light
to indicate that the camera is on-air. The Tally switch is used to control the Tally indicator at the
front of the viewfinder. When this switch is set to the OFF position, the Tally indicator does
not light when the camera is on-air. The Tally switch does not control the tally indicator at the
rear of the carrying handle.
When the camera is on-air, the REC indicator in the viewfinder lights. When the studio ISO
signal is received, the MEDIA indicator lights.
Crisp
Tally Zebra Option
Contr. Bright.
Tally
switch
Zebra
switch
Option
switch
Crispening
control
Contrast
control
Brightness
control