Filter
Top Products
LDK 8000 HDTV camera system User’s Guide (v3.0) 61
Chapter 5 - Operating instructions
6. When the process is completed (within a few seconds) the OK message appears in the
viewfinder.
7. Adjust the skin detail level with the VIDEO\SKIN\SKIN LEVEL item. Decrease the
value below 50 to soften the selected area. Increase the value above 50 to add extra
detail..
5.8 Controls on the TriaxHD adapter
Figure 5-1. Rear controls
5.8.1 Powering the camera
The power supply for the camera and TriaxHD adapter is normally supplied via the Triax cable
from the Base Station. The power on indicator lights when power is supplied and the camera
power switch is set to the on position .
When power is supplied via the Triax cable, an output power socket supplies +12 Vdc, 1.5A
maximum for powering accessories.
Intercom routing switch
VF connector output
signal selection switch
Viewfinder display
signal selection
Audio microphone
switches
Headset production
vol. control selection
Headset volume
controls
Call button
Microphone phantom
power switches
Power on indicator
Circuit breaker button
Mic 2
Call
Eng
Off
Prod
Front
Rear
VF
Ext1
Ext2
Loc
Power on
Mix
Ext
Mic 1
+48V
+48V
HD-SDI (B)/VF
HD-SDI (A)
VF
Script Light
Breaker
12V 1.5A max.
11-17V 5A
Eng Progr Prod
Mic.
Mic.
Line
Line
Ext. SD
Ext.
HD
VF
Front
Rear