Filter
Top Products
LDK 8000 HDTV camera system User’s Guide (v3.0) 33
Chapter 3 - Configurations
3.5 Local mode
A camera head with the LDK 5860 TriaxHD adapter can be used in the local mode. The DC
power supply is applied to the adapter. An OCP 400 operational control panel can be
connected directly to the camera using the RS232 connection. A reference signal can be
applied to genlock the camera.
Standard and WorldCam versions
The HD SDI (B) / VF connector at the rear carries the HD SDI viewfinder signal. The HD SDI (A)
connector carries the HD SDI camera signal.
SportCam version
The HD SDI (A) and HD SDI (B) / VF connectors at the rear carry the HD SDI viewfinder signal.
An HD SDI camera signal output is not available.
Figure 3-5. Camera in local mode
Camera head +
Triax adapter
RS232
connection
Video out
DC power
in
Reference
in
OCP 400