Filter
Top Products
86 LDK 8000 HDTV camera system User’s Guide (v3.0)
Chapter 6 - Menu structure and contents
Audio 1 Level -22dB, -28dB, -34dB,
-40dB, -46dB, -52dB,
-58dB, -64dB
Sets input gain level for audio channel 1
(when audio gain mode is set to local).
User 1 Oper
Audio 1 HPF Off, On Turns high-pass filter for audio channel 1 on
or off. Use to reduce 50Hz hum or low
frequency noise.
User 1 Oper
Audio 2 Source Line, Mic, Mic48, Front Selects source for audio channel 2. User 1 Oper
Audio 2 Level -22dB, -28dB, -34dB,
-40dB, -46dB, -52dB,
-58dB, -64dB
Sets input gain level for audio channel 2
(when audio gain mode is set to local).
User 1 Oper
Audio 2 HPF Off, On Turns high-pass filter for audio channel 2 on
or off. Use to reduce 50Hz hum or low
frequency noise.
User 1 Oper
Tally User 0
Onair Lamp Enable, Disable Select disable when the tally light at the
front of the 7”viewfinder have to follow the
tally signal; select disable if you never want
it to light.
User 0 Oper
Tally Lock Off, On Turns tally lock function on or off. When tally
lock is on, some camera controls are locked
when camera is on air.
User 3 -
Reverse Scan User 0
Reverse Scan Off, On Turns reverse scan on or off. Reverse scan
flips the image and can be used when the
camera is mounted at a rotated angle.
User 0 Scene
Mode Horiz, Vert, Both Selects reverse scan mode:
Horiz = the image is flipped horizontally;
Vert = the image is flipped vertically;
Both = the image is flipped both horizontally
and vertically.
User 0 Scene
Exposure
Lighting -10..+10 (0) Sets the exposure correction to synchronise
with ambient lighting frequency when
exposure mode is 50 Hz or 60 Hz (not
available in high speed video modes).
User 1 Scene
Clean Scan User 1 -
Cl.Scan Mode Extended, Normal Selects clean scan mode:
Normal = shutter is running (no smear);
Extended = shutter is not running (more
accurate clean scan but possible vertical
smear).
User 1 -
Value 50.6.. 103.1 Hz (50 Hz)
54.7 .. 121.5 Hz (60 Hz)
122.0 .. 200.0 Hz (high
speed modes)
Select clean scan frequency. User 1 -
Units Hz, mSec Selects display units for clean scan. User 1 -
Gain Preset User 2
Gain - (dB) -3dB, -6dB Selects gain value for - preset. User 2 Oper
Gain + (dB) 3dB, 6dB, 9dB Selects gain value for + preset. User 2 Oper
Install (user 0) Value(s) Description Level File