Filter
Top Products
17
Remote Control
Press PAUSE or PLAY to return to
normal playback.
PLAY Button
• When the camcorder is in the VCR
mode, press PLAY to begin playback.
REW (Rewind) Button
Camcorder in CAM (Camera) Mode
• When the camcorder is in record-
pause, press and release REW to review
the last few seconds of your recording.
• When the camcorder is in record-
pause, press and hold REW to visually
search the tape in reverse. Release
REW to return to record-pause.
Camcorder in VCR Mode
• When the camcorder is stopped, press
REW to rewind the tape. Press STOP
to stop rewinding the tape.
• When a tape is playing, press and
hold REW to visually search in
reverse. Release REW to return to
normal playback.
REC (Record) Button
• When the camcorder is in the CAM
(camera) mode, press REC to start and
stop recording.
STOP Button
• When the camcorder is in the VCR
mode, press STOP to stop playback,
rewind, or fast-forward operation.
ZOOM Buttons (T and W)
• When the camcorder is in the CAM
(camera) mode:
• Press T to move the lens in the
telephoto (close-up) direction.
• Press W to move the lens in the
wide-angle direction.
Remote Control Sensor
The remote operates the camcorder by infrared light, so it is protected from
electrical and sound interference. However, the remote must be aimed directly at
the camcorder’s remote sensor. There cannot be any obstructions between them.
Note: The camcorder may not respond to the
remote if the remote sensor is exposed to
direct sunlight or strong artificial light.