Filter
Top Products
26
Recording
VCR CAM
PLAYREW F.FWD
STOP PAUSE
EJECT
DISPLAY BLANK
Flying Erase Head
A separate erase head is mounted on
the spinning headwheel (hence the term
“flying”). This allows you to make
clean edits without the “glitches” or
“rainbow noise” that may occur at the
beginning or the end of recordings.
Quick Review Feature
Press and release REW when the
camcorder is in record-pause to review
the last few seconds of a recording.
Make sure the camcorder is in the
CAM mode.
The camcorder will play back the last
few seconds of the recording, return the
tape to its previous position, and return
to record pause.
Camera Edit Feature
The camera edit feature allows you to
position the tape when the camcorder is
VCR/CAM Button in CAM
(CAM (Red) Indicator Lights)
Beep Indicator
in record-pause. Make sure the
camcorder is in the CAM mode.
• Press and hold REW to visually search
the recorded tape in reverse.
• Press and hold F.FWD to visually
search forward on the recorded tape.
Release the button to return the cam-
corder to record-pause at that point on the
tape. Press the thumb trigger (REC on
remote) to start recording at this point.
DISPLAY Button
• Press the DISPLAY button when the
camcorder is connected to a TV
monitor to have the viewfinder or
LCD monitor displays appear on the
TV screen.
• These displays will be recorded during
tape copying if they appear.
• Press DISPLAY again to remove the
displays from the TV screen.
F.FWD
Button
REW Button
DISPLAY Button
STOP Button
PLAY Button