Filter
Top Products
38
Playback
Playback on TV (or VCR) with AUDIO/VIDEO IN Jacks
To connect your camcorder to a TV monitor (or VCR) with AUDIO/VIDEO IN jacks,
you will need the audio/video cable that came packed with your camcorder. If your TV
is already connected to a VCR, you can attach the camcorder to the VCR and watch
what the camcorder is recording or playing on the TV.
Installation
1. Attach the white plug on one end of
the included audio/video cable to the
AUDIO IN jack on the TV (or VCR).
Notes: If your TV (or VCR) has stereo
AUDIO IN jacks, attach the plug to the one
labeled MONO. If one is not labeled
MONO, you may need a Y-adapter, such as
AH25, shown on page 43 to hear both
channels.
2. Attach the yellow plug to the VIDEO
IN jack on the TV (or VCR).
3. Attach the white plug on the other end
of the audio/video cable to the A
(audio) jack (located under the small
cover) on the side of the camcorder.
4. Attach the yellow plug to the yellow
V (video) jack on the camcorder.
AUDIO
IN
VIDEO
IN
AUDIO
IN
L
R
VIDEO
IN
B
ac
k
o
f
Mono VCR or
TV Monitor
Back of
Stereo VCR or
TV Monitor
Optional Y-Adapter
(such as AH25)
White
Audio
Plug
White
Audio
Plug
Yellow Video Plug
Yellow Video Plug
Audio and Video Jacks
Located Behind A/V Cover
White
Audio
Plug
Included
Audio/Video
Cable
Included
Audio/Video
Cable
Yellow Video Plug
White
Audio
Plug
Yellow
Video
Plug
OR
A
V