RCA ProV600 Camcorder User Manual


 
19
Video Cassettes
Cassette Care and Storage
When you are finished with a cassette,
rewind it, remove it from the
camcorder, and label it.
Store cassettes vertically in their
protective cases at normal room
temperatures. Do not leave your
camcorder or cassettes in a car or
outdoors for an extended period.
Excessive heat or cold may damage
your cassettes.
Keep cassettes away from strong
magnetic fields such as electric motors
and other devices.
Insert or Remove a Cassette
Keep dust from entering the cassette
compartment. All dust is abrasive and
will cause excessive wear on the tape
and the camcorder’s recording or
playback heads.
Do not use cassettes with damaged or
spliced tape.
Do not use a cassette if it has been
damaged or exposed to moisture. The
tape may jam and/or damage your
camcorder.
POWER
Switch
Tape
Window
PUSH Here to Close
Compartment
EJECT
Button
Press the EJECT button to open the
cassette compartment.
When inserting the cassette, make sure
the safety tab is at the top and the tape
window is facing out.
After inserting or removing the
cassette, gently close the cassette
Caution: Do not press down on the
top as it may damage the camcorder.
compartment by pressing on the area
labeled PUSH until it clicks into place.
The top closes automatically.
Caution: Insert the
cassette only one way
with the safety tab at
the top and the tape
window facing out.
The cassette should
slide easily into the
compartment. Do not
force the cassette.
Safety Tab