Filter
Top Products
34
Recording
PLAYREW F.FWD
STOP PAUSE
EJECT
DISPLAY BLANK
Time Counter
The time-counter display shows the actual time elapsed when recording or
playing back a segment of tape. During playback, the memory-stop feature
helps locate a certain point on the tape. When memory stop is on, the tape
will stop automatically during rewind or fast-forward when the time counter
reaches M 0:00:00.
To Use the Memory-Stop Feature
1. Locate the place on the tape you want
to return to, press the VCR/CAM
button to light the VCR indicator, and
press PLAY.
2. Press the COUNTER RESET button
on the remote to reset the time counter
to 0:00:00.
3. Press the COUNTER MEMORY
button on the remote control to turn
memory stop on. An M appears in
front of the time counter when
memory stop is on.
REW
Button
4. Continue to play the tape. When you
want to return to the place you
marked, press the STOP button.
5. Press the REW button. The tape will
rewind to the time counter reading
of M 0:00:00.
Notes: During rewind, the tape might not
stop exactly at the M 0:00:00 point.
A minus ( – ) will appear in front of the
time counter if the tape is rewound farther
back than a time counter reading
of 0:00:00.
PLAYSTOP
DISPLAY REC
ZOOM
COUNTER
MEMORY RESET
REW F.FWD
PAUSE
TW
Time Counter With Memory
Stop Turned On
M 0:00:00
REW
Button
COUNTER
MEMORY
Button
STOP
Button
STOP
Button
PLAY
Button
COUNTER
RESET
Button
PLAY
Button
VCR/CAM
Button and
VCR Indicator