Filter
Top Products
39
Playback
Playback Operation and How to Copy Tapes on the VCR
1. A. Camcorder connected directly to
TV: Turn on the TV and tune it to
the video input channel.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the “line”
or “camera mode”. (If your VCR
does not have a “line” or “camera
mode”, consult the VCR owner’s
manual.) Operate the TV as you
normally do to see the signal
coming from the VCR.
2. Slide the POWER switch up to turn on
the camcorder.
3. Press the VCR/CAM button to place
the camcorder in the play mode. The
green VCR indicator will light.
4. Press the PLAY button.
• During playback, use the playback
features on page 37.
5. To copy what the camcorder is
playing, place a blank cassette in the
VCR, and press the VCR’s RECORD
button.
Note: Make sure the memory-stop feature
is turned off (press COUNTER MEMORY)
or the camcorder will enter play pause
when the counter reaches M 0:00:00.
6. Press STOP when you are finished.
Viewing What the Camcorder is Seeing (or Recording)
2. Slide the POWER switch up to turn on
the camcorder. The red CAM
indicator will light.
Note: When the camcorder is used as a
camera, turn the TV’s volume down to
prevent a high-pitched squeal caused by
feedback.
3. Press the REC START/STOP button
(thumb trigger) to begin recording.
You can watch what the camcorder is
seeing (or recording) on the
TV screen.
Caution: The unauthorized recording
of copyrighted material may infringe
the rights of others.
1. A. Camcorder connected directly to
TV: Turn on the TV, and tune it to
the video input channel.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the “line”
or “camera mode”. (If your VCR
does not have a “line” or “camera
mode”, consult the VCR owner’s
manual.) Operate the TV as you
normally do to see the signal
coming from the VCR.
Notes: The remote will also operate the camcorder.
Press the DISPLAY button to have the camcorder’s displays appear on the TV
screen. During tape copying, these displays will be recorded when they appear on
the TV screen.