Filter
Top Products
14
Before Using Your Camera
1
1
Hold the camera grip with
your right hand and hold the
top of the monitor with your
left hand.
2
Slowly lower until it stops.
3
Hold the bottom of the
monitor and lift upward.
4
Adjust the angle.
Perform Step 3 and then Step 2 to retract the monitor.
Caution
• Do not twist or apply strong force to the movable section.
• Be careful not to hit the viewfinder part with the monitor.
Button and Dial Operations
You can operate both a button and e-dial, such as J and R or
5 and Q, to change the settings using either of the following
methods.
Hereafter, this Operating Manual explains by using the “Turn the
dial while pressing the button” operation.
For the 7 and 6 buttons, only the operation of turning R
while pressing the button is available.
Adjusting the Angle of the Monitor
Operation Confirming the Setting
Turn the dial while pressing the
button.
Take your finger off the button.
Press the button, take your finger
off the button, and then turn the
dial.
Press the button again or wait
until the exposure metering timer
goes off.