28
Getting Started
2
When using the D FA645 lens (for digital cameras), all of the functions of this camera are available. Lenses for our medium format
film cameras can also be used with this camera; however, the following restrictions apply.
(x: Available #: Restricted ×: Not available)
Lens Compatibility Chart
Lens A645 FA645 A645/FA645 A645/FA645 67
Accessories
Function
Lens only
With Rear converter A
and Auto extension tube A
With Helicoid
extension tube
*1
With Adapter 645
for 67 lens
G/H/I/K mode xx x ××
J/L mode xx x x
*2
x
Program P-TTL auto flash xx x ××
P-TTL auto flash xx x x x
Automatic change of lighting angle when using
AF540FGZ, AF540FGZ II, AF500FTZ,
AF360FGZ, AF360FGZ II, or AF330FTZ
× x ×××
Display of aperture value in viewfinder at aperture position
9
xx #
*4
××
Display of aperture guide in viewfinder at a position other than
9
*3
v × x ×××
Display of focus indicator in viewfinder in w mode
*5
x
*6
xx x
*6
x
*6
Metering mode switching xx x #
*7
#
*7
[Lens Correction] of the A1 menu × x ×××
*1 This includes all types of helicoid extension tubes and accessories without information contacts.
*2 Stop-down metering
*3 Depending on the lens, the aperture ring value and the value displayed in the viewfinder may not match.
*4 The lens aperture value is displayed when using Auto extension tube A or Rear converter A645 2×.
The display varies when using Rear converter A645 1.4× with a lens other than A
k
645 300mm F4 or FA
k
645 300mm F4.
[Displaying the lens aperture value as is indicated on the lens]
FA645 300mm F5.6, FA645 400mm F5.6, A
k
645 600mm F5.6
[Displaying the maximum effective aperture value when combined with a lens]
A645 200mm F4, FA645 200mm F4, A
k
645 300mm F4, FA
k
645 300mm F4, A645 macro 120mm F4, FA645 macro 120mm F4
[Displaying the aperture value with the aperture stopped down by two stops]
FA645 150mm F2.8
*5 Available only when the lens aperture value without accessories is F5.6 or wider, or when the maximum effective aperture value combined with accessories is F5.6
or wider.
*6 When using A645 macro 120mm F4, the function may become unreliable when the magnification ratio on the lens is set to between “1” (1:1) and “2” (1:2).
D (Spot) is always selected as the focusing area selection mode.
*7 The camera uses C (Center-weighted metering) even when A (Multi-segment metering) is selected.