Filter
Top Products
Before Using Your Camera
1
19
The captured image and shooting information are displayed in
single image display of the playback mode.
Press G to change the type of information displayed in single
image display. Use CD to select the type and press E.
Memo
• Press d to switch between the memory cards inserted in the two
slots, SD1 and SD2.
• The display selected in the Playback Info Display selection screen
appears in playback mode when the camera is turned off and on
again. If [Playback Info Display] is set to off in [Memory] of the A4
menu, the [Standard Information Display] always appears first
when the camera is turned on. (w p.R22)
•
You can display the grid with [Grid Display] of the
B
1 menu. (
w
p.R26)
•
You can set the camera so that the bright (overexposed) areas in the
image blink red with [Highlight Alert] of the
B
1 menu. (
w
p.R26)
Playback Mode
Standard Information
Display
Captured image, file format, exposure
parameters, and operation guide indicators are
displayed.
Detailed Information
Display
Detailed information on how and when the image
was taken is displayed (p.20).
Histogram Display
Captured image and brightness histogram are
displayed (p.21).
Not available during movie playback.
RGB Histogram
Display
Captured image and RGB histogram are
displayed (p.21).
Not available during movie playback.
No Information Display Only the captured image is displayed.
1/
2000
1/
2000 F2.8F2.8 200200 +0.3+0.3
100-0001100-0001
1/
2000
1/
2000 F2.8F2.8 200200 +0.3+0.3
100-0001100-0001
Standard Information DisplayStandard Information Display
Single image display
(Standard Information Display)
Playback Info Display
selection screen