Filter
Top Products
68
Shooting Functions
3
Custom Image
Select the desired picture style from the following modes and
enjoy taking pictures with a creative finishing tone.
*1 The settings of a captured image can be saved with [Save Cross Processing]
of the playback mode palette. (p.69)
Memo
• By default, [Custom Image] is set to [Natural].
1
Press D in standby mode.
The Custom Image setting screen
appears.
2
Select an image finishing
tone.
Available operations when shooting with the viewfinder
Proceed to Step 6 if you do not need to change the parameters.
3
Press G.
The parameter setting screen appears.
Image Tone Parameter
Bright/Natural/
Portrait/Landscape/
Vibrant/Radiant
Saturation: -4 to +4
Hue: -4 to +4
High/Low Key Adj: -4 to +4
Contrast: -4 to +4
Sharpness: -4 to +4
Muted/
Bleach Bypass
Saturation: -4 to +4
Toning: Off/Green/Yellow/Orange/Red/Magenta/
Purple/Blue/Cyan
High/Low Key Adj: -4 to +4
Contrast: -4 to +4
Sharpness: -4 to +4
Reversal Film Sharpness: -4 to +4
Monochrome
Filter Effect: None/Green/Yellow/Orange/Red/
Magenta/Blue/Cyan/Infrared Filter
Toning: Off/Green/Yellow/Orange/Red/Magenta/
Purple/Blue/Cyan
High/Low Key Adj: -4 to +4
Contrast: -4 to +4
Sharpness: -4 to +4
Cross Processing Random/Preset 1-3/Favorite 1-3
*1
Main switch to U Uses Digital Preview to preview the background
image with the selected effect applied.
H Saves the preview image (only when the image
can be saved).
BrightBright
CancelCancel OKOK
Parameter Adj.Parameter Adj.
CheckCheck