Filter
Top Products
54
Shooting Functions
3
5
Press E.
The camera returns to standby mode.
Memo
• The settings for the white balance can be set in the E2 menu.
(w p.R40)
You can save up to three manual white balance settings.
1
Select o in Step 2 on p.53 and press B.
2
Select from o1 to o3.
3
Under the light you wish to measure the white
balance of, select a white area as the subject, and
press the shutter release button fully.
The captured image is displayed.
[The operation could not be completed correctly] appears when
measuring is unsuccessful. Press E to remeasure the white
balance.
4
Use A BCD to specify the measuring range.
5
Press E.
The White Balance setting screen reappears.
You can copy the white balance settings of an image captured
with this camera and save them as Manual White Balance.
1
In single image display of the playback mode,
display the image with the white balance settings
you want to copy and then press
B
.
The playback mode palette appears.
2
Select o (Save as Manual WB) and press E.
The save confirmation screen appears.
3
Select the “Manual” number
1, 2 or 3 to save the settings.
Use Q to select a different image.
4
Press E.
The white balance settings of the selected image is saved as
Manual White Balance and the camera switches to standby mode.
Caution
• The fine-tuned white balance value used when shooting is not
saved.
Manual White Balance
Manual White Balance
Manual White Balance
Cancel
Cancel
Adjust
Adjust
WB
±
WB
±
OK
OK
Check
Check
Saving the White Balance Settings of a
Captured Image
CancelCancel OKOK
Save as Manual 1Save as Manual 1
Save as Manual 2Save as Manual 2
Save as Manual 3Save as Manual 3
Saves this image's White BalanceSaves this image's White Balance
settings as a custom selectionsettings as a custom selection
100-0001100-0001