Filter
Top Products
57
Shooting Functions
3
1
Press A in standby mode.
The Drive Mode setting screen
appears.
2
Select O and press B.
3
Select O or P and press E.
The camera returns to standby mode.
4
Press the shutter release button halfway, then
fully.
The self-timer lamp blinks.
The shutter will be released about 12 seconds or 2 seconds.
1
Press A in standby mode.
The Drive Mode setting screen
appears.
2
Select Q and press B.
3
Select Q, R, or S and press E.
The camera returns to standby mode.
The self-timer lamp blinks.
4
Press the shutter release button halfway.
5
Point the remote control unit towards the remote
control receiver on the front or back of the
camera, and press the shutter release button on
the remote control unit.
Memo
• The maximum operating distance of the remote control unit is
approx. 4 m from the front of the camera and approx. 2 m from the
back of the camera.
• To adjust focus with remote control, set in [19. AF with Remote
Control] of the E 3 menu. (w p.R41)
• When using the Remote Control Waterproof O-RC1, the autofocus
system can be operated with the q button. The r button cannot
be used.
Self-timer
W
Self-timer (12 sec.)
Self-timer (12 sec.)
Cancel
Cancel
OK
OK
Remote Control
W
Remote ControlRemote Control
CancelCancel OKOK