Filter
Top Products
63
Shooting Functions
3
This raises the mirror.
This function can be used with another drive mode set by
pressing A.
1
Turn the Mirror Up dial.
The camera is ready to raise the
mirror.
2
Press the shutter release button fully.
The mirror is raised.
3
Press the shutter release button fully again.
The mirror returns to its original position after an image is taken.
To exit Mirror Lock-up Shooting, return the Mirror Up dial to its
original position.
Memo
• The mirror automatically returns to its original position if 5 minutes
elapse after the mirror is raised or the Auto Power Off function is
activated. Depending on the shooting conditions, the mirror may
return to its original position before 5 minutes elapse.
• To disable the Mirror Up dial operation, set in [27. Mirror Up
Operation] of the E4 menu. (w p.R42)
Caution
• Mirror Lock-up Shooting is not available when shooting with Live
View. When the mirror is raised, the Live View image is not
displayed even if K is pressed.
• Turning the mode dial or adjusting the lens aperture ring when the
mirror is raised lowers the mirror.
• The image preview is not available when the mirror is raised.
• The mirror is not raised during Interval Shooting or Interval
Composite even when the Mirror Up dial is set to the “UP” position.
Mirror Lock-up Shooting
M
.U
P
Shake Reduction
The Shake Reduction function is available when a lens with the SR
system is used in A mode. Refer to the SR-supported lens
manual for details on using the function. The Shake Reduction
function is automatically turned off when Self-timer, Remote
Control, Interval Movie Record, or Mirror Lock-up Shooting is set.
In C mode, the Shake Reduction function can be activated from
[Movie SR] of the C1 menu. (w p.R25)