Filter
Top Products
200
8
Using the GPS
Using the GPS
Set the [GPS On/Off] to [On] for receiving GPS information (latitude, longitude,
altitude, date and time etc.).
The GPS function needs to be always activated to embed GPS information on an
image (p.201), record it to the camera as a log (p.203), save it to the SD Memory
Card as a log file (p.205), and correct the camera clock automatically (p.208).
1
Use the four-way controller (23) to select [GPS] in the
[WSetting] menu.
2
Press the four-way controller (5).
The [GPS] screen appears.
3
Use the four-way controller (23) to select [GPS On/Off].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23)
to select [Off] or [On].
Off: Does not receive GPS information
On: Receives GPS information
Preparation for Using the GPS Function
• When [GPS On/Off] is set to [On], the camera performs positioning
regularly even while the camera power is off, which reduces the battery life.
Estimated battery life: Approx. 60 hr.
(When receiving GPS information continuously with [GPS On/Off] set to
[On], [Logging Interval] set to [15sec.], and the camera turned off.)
• Before changing the battery, set [GPS On/Off] to [Off].
GPS On/Off
GPS Logging
MENU
GPS
GPS Time Sync
Off
Off
On
Cancel
OK
OK