Filter
Top Products
<<
14
>>
Connecting to a Power Source
How to charge the rechargeable battery (SLB-0937)
Charging LED
Before inserting any cables or AC adapter, check the directions
and do not insert by force. It may cause breakage of cable or
camera.
If the charging LED of the AC Charger does not turn on or blink
after inserting the rechargeable battery, please check whether the
battery is inserted correctly.
If you charge the battery with the camera power on, the battery
can't charge fully. Turn the camera off while charging the battery.
Charging LED of the AC Adapter
- If you insert the fully discharged battery to charge it, do not turn on the
camera at the same time. The camera may not be turned on because of
the low battery capacity. Charge the battery for more than 10 minutes
before using the camera.
- Do not use the flash frequently or take a movie clip with the fully
discharged battery charged for a short time. Even if the charger
is inserted, the camera power may be turned off because the
rechargeable battery is discharged again.
Charging LED
Being Charged Red LED is on
Charging is complete Green LED is on
Charging error Red LED is off or blinking
Being discharged
(Using the AC adapter)
Orange coloured LED is on