Filter
Top Products
<<
21
>>
Things to watch out for using the ASR mode
- The digital zoom will not operate in the ASR mode.
- If the lighting condition is brighter than fluorescent lighting conditions,
the ASR will not activate.
- If the lighting condition is darker than in fluorescent lighting conditions,
camera shake warning indicator (
) will display. For best results
only take pictures in situations where the camera shake warning
indicator ( ) is not displayed.
- If the subject is moving, the captured image may be blurred.
- Avoid moving the camera while the [Capturing!] message is displayed
to achieve a better result.
- As the ASR uses the camera's digital signal processor, it may take a
little longer for the camera to process and save the images.
-
L830 : If the image size is or , the ASR mode can't be selected.
-
L730 : If the image size is or , the ASR mode can't be selected.
Starting the recording mode
This mode will reduce the effect of camera shake and help you get a
well-exposed image in dim conditions.
1. Select the ASR mode by rotating the
Mode dial.
2. Point the camera towards the subject and
compose the image by using the LCD
monitor.
3. Press the shutter button to capture an
image.
How to use the ASR mode
You can manually configure all functions aperture value and shutter
speed.
How to use the MANUAL mode
1. Select the MANUAL mode by rotating the
mode dial.
2. Press the Fn button and menu for the shutter
speed and aperture value will display.
Up / Down button : changes aperture value
Left / Right button : changes shutter speed.
3. Press the Fn button twice and take an image.
Smaller Aperture values make the object sharp but blur the
background. Larger Aperture values make both the object and
background sharp.
High Shutter speeds can capture a moving object in a still image as
if the object is not moving. Low Shutter speeds can capture a moving
object with an ‘active’ effect.