<<
1
>>
Instructions Getting to Know your camera
Use this camera in the following order.
Set up the camera driver
Take a picture
Insert the USB cable
Check the camera’s power
Check [Removable Disk]
Before connecting the camera to a PC,
via the USB cable, you will need to set
up the camera driver. Install the camera
driver that is contained in Application
software CD-ROM. (p.96)
Take a picture. (p.20)
Insert the supplied USB cable into the
PC’s USB port and the camera’s USB
connection terminal. (p.99)
Check the camera’s power. If the power
is turned off, preset the camera button
to turn it on.
Open Windows’s EXPLORER and
search for [Removable Disk]. (p.99)
If you use a card reader to copy the images on the memory card to your PC,
the images could be damaged. When transferring the images taken with the
camera to your PC, be sure to use the supplied USB cable to connect the
camera to your PC. Please note that the manufacturer holds no responsibility
for loss or damage of images on the memory card due to the use of a card
reader.
Thank you for buying a Samsung Digital Camera.
Prior to using this camera, please read the user manual thoroughly.
When you require After Sales service, please bring the camera and the
cause of the camera malfunction (such as battery, Memory card etc.) to the
A/S centre.
Please check that the camera is operating properly prior to when you intend
to use it (e.g. for a trip or an important event) to avoid disappointment.
Samsung takes no responsibility for any loss or damage that may result
from camera malfunction.
Keep this manual in a safe place.
Specifications are subject to change without prior notice.
Microsoft, Windows and Windows logo are registered trademarks of Microsoft
Corporation incorporated in the United States and/or other countries.
All brand and product names appearing in this manual are registered
trademarks of their respective companies.
The contents and illustrations of this manual are subject to change without
prior notice for upgrading the camera functions.