<<
32
>>
Selecting the self-timer
1. Select a RECORDING mode with the
exception of VOICE RECORDING mode.
2.
Press the SELF-TIMER ( ) button until the
desired mode indicator displays on the LCD
monitor. A 10 second, 2 second, or Double self-
timer icon appears on the LCD monitor.
2SEC self-timer ( ):
Pressing the shutter button will allow an
interval of 2 seconds before the image is taken.
10SEC self-timer ( ):
Pressing the shutter button will allow an interval of 10 seconds
before the image is taken.
Double self-timer ( ):
A picture will be taken after about 10 seconds and 2 seconds later
a second picture will be taken. When using the flash, the 2-second
self-timer may be delayed for longer than 2 seconds depending on
the flash charging time.
3. When you press the SHUTTER button, the picture will be taken after
the specified time has elapsed.
Self-timer
( )
/ Right button
If you operate the Self-timer button during the self-timer operation,
the self-timer function is cancelled.
Use a tripod to prevent the camera from shaking.
[Selecting the 10 SEC self-timer]
MENU / OK button
MENU button
- When you press the MENU button, a menu related to each camera
mode will be displayed on the LCD monitor. Pressing it again will
return the LCD to the initial display.
- A menu option can be displayed when the following are selected :
MOVIE CLIP and STILL IMAGE mode. There is no menu available
when the VOICE RECORDING mode is selected.
OK button
- When the menu is displayed on the LCD monitor, this button is used
for shifting the cursor to the sub menu or for confirming data.
[Menu off]
[Menu on]
[Pressing the MENU button]
RECORDING
Contrast
NormalSharpness
Normal
Center AFFocus Area
OffVoice Memo
Voice Recording
Exit Move
MENU