Filter
Top Products
<<
44
>>
Drive mode ISO
Wise Shot
2 images are taken at a time. One is taken
in the Fill-In Flash mode and the other is
taken in the ASR mode.
How to use the wise shot
1. Select the ASR mode by rotating the mode
dial and press the Fn button.
2. Select Drive menu tab by pressing the Up and Down button.
3. Press the Shutter button to capture images.
4. The captured images are saved.
In the Wise shot, the shutter speed value shown on the LCD may
be different from the real shutter speed.
[Auto] : The camera's sensitivity is
automatically changed by variables
such as lighting value or subject
brightness.
[ISO 80, 100, 200, 400, 800, 1600 ] :
You can increase the shutter speed while
the same amount of light is present, by
increasing the ISO sensitivity. However, the image may be saturated in
high luminance.
The higher the ISO value, the higher the camera’s sensitivity to
light and therefore the greater its capacity to take pictures in dark
conditions. However, the noise level in the image will increase as the
ISO value increases, making the image appear coarse.
You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
ISO
Auto
DRIVE
Wise Shot