Filter
Top Products
26
Using the camera buttons to adjust the camera
The RECORDING(AUTO, APERTURE PRIORITY, SHUTTER PRIORITY, MANUAL,
VOICE RECORDING, MOVIE CLIP, NIGHT SCENE) mode function can be set up by using
the camera buttons.
Used for turning the camera’s power on / off.
Slide the power switch to turn the power on.
If this camera isn’t operated during the specified
time(about 60 SEC.), the camera power will be idle(LCD
monitor : OFF, Mode dial lamp : ON ) automatically. To
use the camera again, press any of the camera buttons
except the power switch. If there is no operation during the
specified time after the idle mode, the camera power will be turned off automatically to save
battery life. Slide the power switch and hold it for 3 seconds to turn the power on without the
‘start’ sound.
POWER switch
Used for taking an image or recording voice in the
RECORDING mode.
In MOVIE CLIP mode : Pressing the shutter button down
fully starts the process for recording a movie clip. Press the
shutter button once and the movie clip is recorded for as long
as the available recording time in the memory allows. If you
wish to stop recording, press the shutter button again.
In STILL IMAGE mode
Pressing the shutter button down halfway activates the auto focus and checks the condition
of the flash. Pressing the shutter button down fully takes the image and stores the relevant
data regarding the shot. If you select voice memo recording, the recording will start after the
camera has finished storing the image data.
SHUTTER button
If the menu is not displayed, this button works as the
OPTICAL ZOOM or DIGITAL ZOOM button.
ZOOM W/ T button