Filter
Top Products
65
Selecting Video out type
Quick view
NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,
Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway.
When using a TV as an external monitor, you will need to select the external or AV
channel of the TV.
There will be a digital noise on the external monitor, but it is not a malfunction.
If the image is not in the centre of the screen, use the TV controls to centre it.
When the camera is connected to an external monitor, the menu will be visible on the
external monitor and the menu functions are the same as those indicated on the LCD
monitor.
INFORMATION
If you enable Quick View before capturing an image, you can view the image you just
captured on the LCD monitor for the duration set in the [QUICK VIEW] setup. Quick view is
possible only with still images.
Setting Quick View
1. Rotate the mode dial to SETUP mode and the [SETUP
1/3] menu will display.
2. Select the [SETUP 3/3] menu by pressing the LEFT/
RIGHT button.
3. Select the [QUICK VIEW] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[OFF] : The quick view function can’t be activated.
[01 ~ 03 SEC] : The captured image is briefly displayed during the selected time.
SETUP 3/3
SET:OK
BACK:
QUICK VIEW
01 SEC