Filter
Top Products
40
If you press the OK button after selecting [CONTINUOUS],
the screen shown on the side will appear on the LCD
monitor. Select the desired number of continuous shots by
pressing the UP and DOWN button and press the OK
button.
You can select continuous shooting or AEB(Auto Exposure
Bracket ) shooting in this menu. If you select
[CONTINUOUS] or [AEB], the flash will automatically be
set to Flash Off.
SINGLE : A picture will be taken each time you
press the Shutter button.
CONTINUOUS : As many pictures as the number of
shots you have set will be taken when
the Shutter button is pressed once.
Use this to take pictures of moving objects/people.
AEB :
3 pictures will be taken continuously, 1 overexposure (+0.5EV), 1 normal
exposure (0.0EV), and 1 underexposure (-0.5EV) respectively. Use this
when it is difficult to determine the exposure level of the subject.
Metering
[ AUTO mode ]
STILL IMAGE 1/2
SET:OK
BACK:
SHOOTING
SINGLE
CONTINUOUS
AEB
[ AUTO mode ]
STILL IMAGE 1/2
SET:OK
BACK:
# OF SHOOT
2
If you cannot obtain suitable exposure conditions, you can change the metering method to
take brighter pictures.
MULTI ( ) :
Exposure will be calculated based on an
average of the available light in the image
area. However, the calculation will be
biased towards the centre of the image
area. This is suitable for general use.
SPOT ( ) : Only the rectangular area in the center
of the LCD monitor will be metered for
light. This is suitable when the subject in
the center is exposed correctly,
regardless of the back lighting.
[ AUTO mode ]
STILL IMAGE 1/2
SET:OK
BACK:
METERING
MULTI
SPOT
Shooting