Filter
Top Products
62
Imprinting the recording date
You can set up the date type that will be displayed on the captured images.
Selecting Date Format
1. Rotate the mode dial to SETUP mode and the [SETUP
1/3] menu will display.
2. Select the [SETUP 2/3] menu by pressing the LEFT/
RIGHT button.
3. Select the [DATE TYPE] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
Date type : [Y/M/D] / [M/D/Y]/ [D/M/Y]
There is an option to include DATE/TIME on still images.
Date Imprinting
1. Rotate the mode dial to SETUP mode and the [SETUP
1/3] menu will display.
2. Select the [SETUP 2/3] menu by pressing the LEFT/
RIGHT button.
3. Select the [IMPRINT] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[OFF] : The DATE&TIME will not be imprinted on the image file.
[DATE] : Only the DATE will be imprinted on the image file.
[DATE&TIME] : The DATE&TIME will be imprinted on the image file.
Setting up the Date/ Time type
The Date & Time are imprinted at the bottom right side of the still image.
The date will be imprinted as a DATE TYPE setting.
TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the 24
hour clock.
The imprint function is applied only to still images.
INFORMATION
SETUP 2/3
SET:OK
BACK:
DATE TYPE
Y / M / D
M / D / Y
D / M / Y
SETUP 2/3
SET:OK
BACK:
IMPRINT
OFF
DATE
DATE & TIME