Filter
Top Products
24
Using the camera buttons to adjust the camera
The RECORDING(STILL IMAGE, VOICE RECORDING, MOVIE CLIP) mode function can be
set up by using the camera buttons.
Used for turning the camera’s power on / off.
If there is no operation during the specified time, the
camera’s power will be turned off automatically to save
battery life. Pressing the power button for over 3 seconds will
deactivate the buzzer sound function.
POWER button
Used for taking an image or recording voice in the
RECORDING (STILL IMAGE, VOICE RECORDING,
MOVIE CLIP) mode.
In MOVIE CLIP mode : Pressing the shutter button down
fully starts the process for recording a movie clip. Press the
shutter button once and the movie clip is recorded for as long
as the available recording time in the memory allows. If you
wish to stop recording, press the shutter button again.
In STILL IMAGE mode
Pressing the shutter button down halfway activates the autofocus and checks the condition of
the flash. Pressing the shutter down fully takes the image and stores the relevant data
regarding the shot. If you select voice memo recording, the recording will start after the camera
has finished storing the image data.
SHUTTER button
If the menu is displayed in Still Image mode, pressing the
WIDE(W)/TELE(T) button will skip 5 menu tabs at a time.
If the menu is not displayed, this button works as the
OPTICAL ZOOM or DIGITAL ZOOM button.
This camera has a 3X optical zoom and a 3X digital zoom
function. Using both will offer a total zoom ratio of 9X.
When you press the zoom (W/T) button, the zoom bar will
display in the upper center part of the LCD monitor.
WIDE / TELE button