Filter
Top Products
75
Avatar
When selecting or playing back an avatar, please use the adapter (3.3V 2.0A) for the
camera.
You can store as many avatars as memory capacity allows.
When the avatar is selected, the startup image will be replaced by the avatar.
Do not arbitrarily change the folder name of the Memory Stick Duo. If you do, the
camera cannot recognize avatar files.
If you create an avatar from a video, the picture quality may deteriorate slightly.
INFORMATION
You can select the image that is first displayed on the LCD monitor whenever the camera is
turned on. If both the avatar and startup image are selected, only the avatar will be displayed.
To view the startup image, cancel the selection of an avatar.
Setting Startup Image
1. In a mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select [MYCAM]
menu tab.
3. Select [S.IMAGE] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
5. Press the menu button twice and the menu will disappear.
MyCAM
AVATER
S.IMAGE
S.SOUND
BACK:
SET:OK
Playing Back an Avatar
1. Press the PLAY ( ) button to select Play mode.
2. The last image taken will be displayed on the LCD
monitor.
3. Use the LEFT and RIGHT buttons to select an avatar file
for playback.
4. Press the PLAY/PAUSE ( ) button. The selected
avatar will be played.
- To pause playback of the avatar file, press the
PLAY/PAUSE ( ) button again.
- During avatar playback, press the LEFT or RIGHT button to rewind or fast-forward the
avatar file.
- To stop playback of the avatar file, press the PLAY/PAUSE ( ) button, and then press
the LEFT or RIGHT button.
PLAY
Start up image