Filter
Top Products
30
Self-timer( ) / Right( ) button
Selecting the self-timer
1. Slide the mode switch to the STILL IMAGE mode.
2. Press the SELF-TIMER( ) button until the desired
mode indicator displays on the LCD monitor. A 2 second
self-timer or 10 second self-timer icon appears on the
LCD monitor.
2SEC self-timer( )
: Pressing the shutter button will allow an interval of 2
seconds before the image is taken.
10SEC self-timer( )
: Pressing the shutter button will allow an interval of 10
seconds before the image is taken.
3. Press the SHUTTER button. The picture will be taken
after the specified time has elapsed.
When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor
shift to the sub tab.
When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-
timer( ) button. This function is used when the photographer would also like to be in the
image.
[ Selecting the 10SEC self-timer ]
The default is OFF.
When taking a picture using the self-timer, the function lamp works as follows:
2 second self-timer setting : The function lamp blinks at 0.25 second interval for 2
seconds.
10 second self-timer setting : The function lamp blinks at 1 second interval for the first 7
seconds. It blinks at 0.25 second interval for the remaining
3 seconds.
If you operate the Power button, Mode switch, and Self-timer button during the self-timer
operation, the self-timer function is cancelled.
Use a tripod to prevent the camera from shaking.
INFORMATION