Filter
Top Products
ENGLISH
118
118
✤
✓
✓
✓
✓
✓
✤
Maintenance :
Cleaning and Maintaining the CAM
Cleaning the Body
✤ To Clean the Exterior of the CAM
✓ To clean the exterior, use a soft dry cloth.Wipe the body
gently.
Do not apply excessive force when cleaning, gently rub the
surface.
✓ The LCD monitor surface should not be pressed.Use a soft
dry cloth to clean the surface.
✓ To clean the lens, use an optional air blower to blow out dirt
and other small objects.Do not wipe the lens with cloth or
your fingers.If necessary, use lens cleaning paper.
✓ Do not use thinner, alcohol or benzene for cleaning.
Otherwise, the finish may be damaged.
✓ Cleaning should be done only after the battery pack has been
removed, and other power sources have been disconnected.
The CAM incorporates a rechargeable lithium cell that maintains the
date and other settings even when the AC adaptor and the battery
are removed.The rechargeable lithium cell is automatically recharged
when the CAM is used.
Charging the Built-in Rechargeable Battery
✤ If The CAM is not used at all, the cell runs down in 5 days.In this
case, connect the AC adaptor to the CAM and turn on the power
switch.Then leave it for 24 hours.
After that, set the date and other settings again.
Using the Built-in Rechargeable Battery