Filter
Top Products
ENGLISH
120
120
Troubleshooting
Not enough free space
for saving files
The file is corrupted
The paper is insufficient.
The paper is caught in
the printer.
Ink is low.
The file is wrong.
The error is occurred
while transferring data.
Battery is low.
The hold key is locked.
The memory card is
corrupted.
Format the memory card.
Failed to write.
Failed to read.
The format is not
supported.
Memory Stick is
protected to write.
The video file is
corrupted.
Not enough free
space
Corrupted file
Paper error
Printer error
Ink error
Wrong error
USB transfer error
Low battery
Holding the key
Card error
Not formatted
Write error
Read error
Not supported
format
Write protected
MPEG decoding
error
Check the space of internal memory or the
Memory Stick.
Delete the corrupted file.
Check the paper in the printer.If there is no
paper, insert paper.
Check that paper is caught in the printer.Pull out
the caught paper.
Check if the ink or toner is low.
Check that the file is JPEG.
Disconnect the USB cable and connect it again.
Charge the battery pack or connect the AC
Adapter.
Unlock the hold key and operate the CAM.
Format the Memory Stick or replace it with a
new one.
Format the Memory Stick.
Check the memory space or format the memory.
Delete the file.
The AVI or JPEG file that is not supported.
Check the supported file on the page 29.
Unlock the Memory Stick.
Delete the corrupted file.
Display Informs that… Action
Self Diagnosis Display
✤ If these instructions do not solve your problem, contact your nearest Samsung
dealer or authorized service center/personnel.
The power is not connected properly.
The battery is dead.
The battery is too cold.
The DATE/TIME is not set.
Focus is set to manual mode.
Recording was done in a dark place.
Lens is covered with condensation.
Symptom Possible Causes Measure
Connect the AC adapter properly,
page 23.
Replace the dead battery pack .
Warm up the battery or move to
warmer place.
Set the DATE/TIME, pages 88~89.
Set focus to AUTO .
Use strobe or lit the place.
Clear the lens and check the focus .
No power is supplied
DATE/TIME is wrong
Focus does not
adjust automatically
Not enough free
space
Corrupted file
Paper error
Printer error
Ink error
Wrong error
USB transfer error
Low battery
Holding the key
Card error
Not formatted
Write error
Read error
Not supported
format
Write protected
MPEG decoding
error
✤