Filter
Top Products
English _33
DVD camcorder mode: recording/playback
RECORDING MOVIE IMAGES ON A DISC
• Set the Storage mode switch to DISC before recording on a disc.
(SC-DX103/DX105 only)
page 30
• You can record movie images using the remote control. (SC-DX105 only)
page 13
• This DVD camcorder provides two Recording start/stop buttons. One is on the rear
side of the camcorder and the other is on the LCD panel. Select the Recording start/
stop button that works best for you.
1. Turn the DVD camcorder on.
• Connect a power source to the DVD camcorder.
(A battery pack or an AC power adaptor)
• Slide the POWER switch downwards to turn the DVD camcorder on.
• Set the Storage mode switch to DISC. (SC-DX103/DX105 only)
page 30
2. Check the subject on the LCD screen. (Lens and LCD)
• Set the Lens open/close switch to open ( ).
page 10
3. Press the Recording start/stop button.
• The (
) recording indicator will display, and recording will start.
• Press the Recording start/stop button again to stop recording.
4. When recording is finished, turn the DVD camcorder off.
0:00:00 [30 min]
STBY 0:00:00 [30 min]
(AD68-02550A) SC-DX100_ENG_IB.indb 33 2008-03-10 ¿ÀÈÄ 4:16:39