Samsung SHR-5082 Security Camera User Manual


 
03 CONNECTING
connecting _13
Connecting to Internet through ADSL
CONNECTING THE USB
1. There are two USB connecting ports on the
front and rear panels of the product.
2. USB Hard Disk, USB CD/DVD, and USB
Memory can be connected through any of
those ports.
3. If the USB HDD is connected to the system,
it should be detected and set through
Menu > System > Storage Setup before
operation.
4. The product provides the HOT PLUG feature
that allows the connection/removal of USB
devices during system operation.
CAUTION
The USB type of hard disk
should be set to Master.
If the backup USB device cannot
be formatted in the DVR, format
it as FAT32 using your PC.
For more details, refer to the System
section in Chapter 5 Menu Setup.
CONNECTING THE ALARM
INPUT/OUTPUT
The Alarm IN/OUT ports on the rear of the
product have the following elements:
ALARM IN 1 to 16: Alarm input ports
ALARM RESET: When receiving an ALARM
RESET signal, the system clears the current
ALARM input or output signal and resumes
alarm sensing.
ALARM OUT 1 to 4: Alarm output ports
5162 Alarm IN/OUT Ports
5082 Alarm IN/OUT Ports
SHR-5162_Eng.indb 13 2007-06-18 ソタタ・11:47:58