Samsung SHR-5082 Security Camera User Manual


 
54_ Smart Viewer
Language
You can set the language to be displayed on
Smart Viewer.
Site Setup
Click Site Setup for configuring the site-related
settings. Smart Viewer connects to the DVR or
site that has been registered here. A site can
have multiple DVRs.
1
3
5
2
4
1. The registered DVRs are displayed.
2. You can use the buttons for adding/deleting/
editing DVRs.
3.
Use the button to move the selected DVR to
the selected site. But, if the selected DVR is
set to ADSL Network, it cannot be moved to
the site.
4.
The registered sites are displayed.
5. You can use the buttons for adding/deleting/
editing sites.
DVR List
The DVRs that you want to connect using
Smart Viewer are listed in DVR List. You can
register a new DVR, or delete/edit the selected
DVR. The name and IP/MAC address of the
registered DVR are displayed. If the DVR uses
a static IP, select Static IP in Address Type,
enter the name of DVR in Name, and the IP
address in IP Address.
Set the port number in Port No. so that it
matches the port number that you’ve set in the
network menu of DVR. For connecting to the
DVR, you need to set both Admin password
and user password.
If your DVR uses a dynamic IP such as in a
cable modem, VDSL, and PPPoE for ADSL,
set the address in MAC Address.
Set the port number in Port No. so that it
matches the port number that you’ve set in the
network menu of DVR.
SHR-5162_Eng.indb 54 2007-06-18 ソタタ・11:49:53