Samsung SHR-5082 Security Camera User Manual


 
Smart Viewer _49
10 Smart Viewer
- Storage Setup
It displays the information of the HDD that
is contained in your DVR. Also you can
d
etermine whether or not to repeat recording
and make a beep sound when any disk
failure happens.
- Remote Control Device
You can configure the settings for the
remote control that is installed in the DVR
system. You can toggle between On and
O
ff. The remote control ID can be set among
0 to 99.
If you have directly installed the remote
control in the DVR system and activated
the setup, PTZ controls are not enabled
using Smart Viewer.
Camera
You can configure the camera-related settings.
F
or more details, see Chapter 5, “Menu Setup.”
- Camera Configuration.
This configures the camera-related settings
such as video/audio availability, camera title,
and auto sequencing interval for the DVR.
CAUTION
Only English is available for the title.
If you enter the title in your local
language and apply it, a warning
message appears to ask you to
retype it.
You can input the title up to 15
digits.
If you leave the title blank, a warning
message appears to ask you to
retype it.
SHR-5162_Eng.indb 49 2007-06-18 ソタタ・11:49:39