Samsung SHR-5082 Security Camera User Manual


 
MENU
MENU SETUP
System
Camera
Monitoring
Record Mode
Event Record
Schedule
Backup
Network
Camera Configuration
PTZ Device
Screen Setup
Move/Control Select Exit
CancelOK9-16
Camera Config
Cam Video Audio Title Auto Seq
1 On Off CAM_01 5sec
2 On Off CAM_02 5sec
3 On Off CAM_03 5sec
4 On Off CAM_04 5sec
5 On Off CAM_05 5sec
6 On Off CAM_06 5sec
7 On Off CAM_07 5sec
8 On Off CAM_03 5sec
CancelOK
CapsLock Delete Back Space
05 MENU SETUP
menu setup _25
You cannot use the PTZ device and
remote control device together at the
same time due to communication
problem. In PTZ control mode, the
PTZ mode of DVR is canceled when
the remote control is connected. On
the contrary, the remote control is
disconnected when the DVR switches to
PTZ mode.
Refer to the user manual of remote
control to learn how to handle the PTZ
device using the remote control.
CAMERA
The detailed items for camera menu are as
shown in the picture:
Camera Configuration
Video
- On: The camera image from the selected
channel appears.
-
Off: The camera image from the selected
channel disappears.
-
Covert1: Displays the information except
for the video information on the selected
channel.
-
Covert2: Does not display any information.
The settings for audio, camera name,
and auto sequence are not allowed for
the channel whose video is set to Off.
In case of SHR-5082, only 8 channels
are displayed.
Audio
-
On: You can hear the sound in the selected
channel.
-
Off: You cannot hear the sound in the
selected channel.
You can select only the number 1 to 4
channels to hear sound.
Title
You can name the camera of the selected
channel. If you press the ENTER button, the
virtual keyboard appears.
Virtual keyboard
Use the Direction buttons to select a
character and use the ENTER button to
type the selected character. You can type
up to 15 characters. No space is allowed
f
or input. If you select CapsLock, the virtual
keyboard switches between upper case
mode and lower case mode.
Auto Seq
You can set the auto sequencing interval for
each channel. The setting applies in the live
mode. When the value of a channel is set to
Off, the channel is not displayed in the auto
sequence mode.
SHR-5162_Eng.indb 25 2007-06-18 ソタタ・11:48:16