Filter
Top Products
English _29
● INSTALLATION & CONNECTION
Installing by wall mount
`
Fix the installation base with the bracket
1. Fix the base with the bracket by turning it
clockwise.
2. As shown in the picture below, gently press and lift
up the handle of the hinged door on the bottom of
the installation base. Please refer to the “Camera
Wiring Interface Board” on page 21, connect the
wires.
J
`
Do not connect the camera to a power outlet until the
installation is complete. Supplying power while the
installation is in progress may cause fire or damage the
product.
3. Connect the camera safety wire to the installation base.
Safety Cable