Filter
Top Products
installation & connection
32_ installation & connection
`
Installing on the wall by combining the outdoor housing and ceiling mount
adapter
1. Wrap the screw part of the housing
with a sufficient amount of Teflon tape
for assembly.
2. When separating the dome cover and
fastening it to the housing frame, make
sure that the gasket is not loosened to
separate from the dome cover.
3. Install the ceiling mount adapter for
waterproofing, and apply the silicon
sealant between and around the wall
and ceiling mount for sealing.
J
`
Take particular caution to ensure that
there is proper sealing if the installed side
is not flat.
Optional Accessories for Installation
For your easier installation, you can purchase appropriate optional accessories available.
1. If installing the camera on the wall
• Wall mount (SBP-300WM1)
Ceiling mount
adapter
Screw
unit
Ceiling board
Silicon
sealant
Teflon tape
Concrete ceiling
Dome gasket