Filter
Top Products
27
ENGLISH
CZECH
Z‡klady z‡znamu
ENGLISH
Adjusting the LCD
- Your camcorder is equipped with a 2.5 inch colour Liquid Crystal
Display(LCD) screen, which enables you to view what you are recording
or playing back directly.
- Depending on the conditions in which you are using the camcorder
(indoors or outdoors for example), you can adjust ;
Brightness
Colour
1. Set the POWER switch to CAMERA or PLAYER position.
2. Open the LCD monitor, the LCD is turned on.
3. Press the MENU ON/OFF button.
4. Press the , buttons so that LCD ADJUST is
highlighted.
5. Press the ENTER button.
- Using the , buttons, select a menu
item you want to adjust.
6. Press the ENTER button again.
- Using the , buttons, adjust the colour
or brightness levels.
7. Press the MENU ON/OFF button to finish the
LCD ADJUSTMENT.
Using the VIEWFINDER
Basic Recording
(MENU) STBY
0:00:00
DIS.........OFF
DIGITAL ZOOM
DSE SELECT
PROGRAM AE
ZERO MEM...OFF
EXIT:MENU
LCD ADJUST
LCD ADJUST STBY
0:00:00
COLOUR
EXIT:MENU
BRIGHT 00 18 36
Use the focus adjustment knob of the VIEWFINDER
to focus the picture. (refer figure 1)
Take care if you use a large size of battery pack
that obstructs the VIEWFINDER’s movement.
(refer figure 2)
Adjusting the Focus
Using the VIEWFINDER
Nataven’ LCD monitoru
ÐVaäe videokamera je vybavena 2,5 palcovùm LCD monitorem, kterù
v‡m umoìËuje sledovat nahr‡vanù z‡bžr nebo pÞehr‡vanù z‡znam na
ÒobrazovceÓ monitoru.
ÐV z‡vislosti na podm’nk‡ch, za jakùch pouì’v‡te videokameru (napÞ’klad
venku nebo vevnitÞ), móìete nastavit:
Jas
Barvu
1. Nastavte sp’na‹ na reìim Camera nebo Player.
2. OtevÞete LCD panel, LCD monitor se zapne.
3. Stisknžte tla‹’tko MENU ON/OFF.
4. Tisknžte tla‹’tka , neì se vysv’t’ LCD ADJUST
(nastaven’ LCD monitoru).
5. Stisknžte tla‹’tko ENTER.
Ð za pouìit’ tla‹’tek , vyberte poloìku
menu, kterou chcete upravit.
6. Znovu stisknžte tla‹’tko ENTER.
Ð za pouìit’ tla‹’tek , upravte
barevnost a ostrost obrazu.
7. Stisknut’ tla‹’tka MENU ON/OFF
ukon‹’te nastavov‡n’ LCD monitoru
(LCD ADJUSTMENT).
ZaostÞen’
Pouìijte zaostÞovac’ knofl’k na hled‡‹ku k zaostÞen’
obrazu (viz obr. 1).
Pouì’v‡n’ hled‡‹ku
Jestliìe pouì’v‡te velkou baterii, dejte pozor, móìe
pÞek‡ìet pÞi manipulaci s hled‡‹kem (viz obr. 2).
Hled‡‹ek
ENTER
MENU
ON/OFF
12