Filter
Top Products
Camera Settings (CAMERA)
16
Sets the appropriate shutter speed according to your surveillance
purpose.
The following shutter speed modes are available.
• Fast shutter speed (SHORT)
• Slow shutter speed (LONG)
If you do not use the electronic shutter, set [SHUTTER] to “OFF”.
b Fast shutter speed (SHORT)
When viewing fast-moving target objects, higher shutter speed
produces clearer images with less blurs.
1
Use the joystick lever (xy) to select [SHUTTER],
use the lever (vw) to select “SHORT y”, and press
the [ENTER] button.
The ES SETTING screen appears.
2
Use the joystick lever (vw) to select the desired
shutter speed.
Available settings: 50, 120, 250, 500, 1000, 2000, 4000,
10000 (1/N sec.)
☞ After completing setting, use the lever to move the cursor to
[MENU] and select “BACK” or “END”.
b Slow shutter speed (LONG)
When the target object is in dark condition, making the exposure time
longer increases sensitivity, enabling you to view target object more
brightly. Select desired shutter speed according to the shooting
conditions.
The initial setting for slow shutter spped (LONG) is “x1”.
1
Use the joystick lever (xy) to select [SHUTTER],
use the lever (vw) to select “LONG y”, and press
the [ENTER] button.
The ES SETTING screen appears.
2
Use the joystick lever (vw) to select the desired
shutter speed.
Available settings: x1, x2, x4, x8, x16, x32
(Each option represents a multiple of field
time. The higher the number, the longer
the exposure time.)
☞ After completing setting, use the lever to move the cursor to
[MENU] and select “BACK” or “END”.
E Setting the electronic shutter (SHUTTER)
The electronic shutter cannot be set in the following
conditions.
• For the auto iris setting, the electronic sensitivity
setting is activated. (When the [IRIS] is set to “AUTO”,
[SENSE UP] in the IRIS SETTING screen is set to other
than “OFF”.)
• For the manual iris setting, the electronic iris is
activated. (When the [IRIS] is set to “MANU”, [EI] is
set to “ON”.)
To avoid flicker
If the camera is installed under fluorescent lighting and
the power supply frequency is 60Hz, set the shutter
speed to “120 (1/120 sec)” to avoid flicker.
y
y
y
y
y
y
SYNC
IRIS
WHITE BALANCE
BLC
SHUTTER
APERTURE
AGC
GAMMA
DAY/NIGHT
PRESET
MENU
INT
AUTO
ATW
OFF
SHORT
ON
ON
0.45
AUTO
OFF
BACK
ES SETTING
SHUTTER SPEED
PRESET
MENU
50
OFF
BACK
When the exposure time is longer, moving objects may
cause conspicuous afterimages, blurs and white spots.
ES SETTING
SHUTTER SPEED
PRESET
MENU
x1
OFF
BACK
L5BU2_XE(VCC-MC600P_MC500P)(GB).book 16 ページ ２００７年１月１８日 木曜日 午前９時４４分