Filter
Top Products
5
Basic Operations for Performing Settings in
the Menu
To perform settings in the menu, use the joystick lever (1) on the system controller and the [ENTER] button (2) in the CAMERA MENU
CONTROL screen.
• Joystick lever:
Used to move the cursor or select menu options.
Instead of the joystick lever, the control buttons shown in (3) in
the CAMERA MENU CONTROL screen can be used to move the
cursor or select menu options.
• [ENTER] button:
Used to confirm your selection or execute operation commands.
Memo: Some settings in the menu can be performed by using the
sub screen on the system controller. For details, refer to the
system controller instruction manual.
● To select the menu to perform settings
Use the joystick lever (xy) to move the cursor highlighting the menu
item up or down. Move the cursor to your desired menu item using
the lever.
● To display an advanced setting screen for the
selected menu
The menu item shown with y mark has an advanced setting screen.
After selecting the menu item with y mark, press the [ENTER] button
to display the advanced setting screen.
● To select an option for the setting item
Use the joystick lever (vw) to display the available options in turn.
● To go back to a previous setting screen
Move the cursor to “MENU” and select the “BACK” option, then press
the [ENTER] button.
● To exit from the menu screen
Move the cursor to “MENU” and select the “END” option, then press
the [ENTER] button.
Memo: If there is no menu operation for three minutes or more, the
menu screen is automatically exited.
● To display the menu screen again
Press the [MENU] button in the CAMERA MENU CONTROL screen.
● To restore your selected options to initial values
Move the cursor to “PRESET” and change its option to “ON”, then
press the [ENTER] button.
Memo: The following settings cannot be restored.
•Privacy mask
• Preset position
• Camera view
• Camera title
• Password
☞ In this manual, xy represent vertical joystick lever operation
and vw represent horizontal joystick lever operation.
MENU
ENTER
esc
CAMERA MENU CONTROL
CAMERA MENU CONTROL
Esc to ex
Esc to ex
it CAM 2 DVR 1
t CAM 2 DVR 1
1
2
3
<CAMERA MENU
CONTROL screen>
CAMERA
LENS
PAN/TILT
AUTO MODE
ALARM
PRIVACY MASK
PASSWORD
LANGUAGE
OPTION
PRESET
MENU
SET
SET
SET
SET
SET
SET
SET
SET
SET
OFF
BACK
y
y
y
y
y
y
y
y
y
Cursor
SYNC
IRIS y
WHITE BALANCE y
BLC
SHUTTER
APERTURE y
AGC y
CAMERA y
LENS y
PAN/TILT y
AUTO MODE y
ALARM y
PRIVACY MASK y
PASSWORD y
SET
SET
SET
SET
SET
SET
SET
INT
AUTO
ATW
OFF
OFF
ON
ON
SYNC y
IRIS y
WHITE BALANCE y
BLC
SHUTTER
APERTURE y
AGC y
SYNC
IRIS y
WHITE BALANCE y
BLC
SHUTTER
APERTURE y
AGC y
INT
AUTO
ATW
OFF
OFF
ON
ON
L-L
AUTO
ATW
OFF
OFF
ON
ON
PRESET
MENU
OFF
BACK
PRESET
MENU
OFF
END
PRESET
MENU
ON
BACK
L5BU2_XE(VCC-MC600P_MC500P)(GB).book 5 ページ ２００７年１月１８日 木曜日 午前９時４４分