Filter
Top Products
Miscellaneous Settings (OPTION)
51
Cleans the camera’s horizontal rotation contact area.
1
Use the joystick lever (xy) to select [REFRESH] –
“SET y”, and press the [ENTER] button.
Cleaning starts, and after the cleaning completes the startup
movements are performed.
Memo: The horizontal rotation contact area of the camera always
moves. When the contact area becomes dirty, the camera’s
operation can be unstable, burst can occur, or preset
positions may deviate. It is recommended to clean the
rotation contact area periodically by using the Refresh
function.
☞ After completing setting, use the lever to move the cursor to
[MENU] and select “BACK” or “END”.
D
Performing the refresh function
(REFRESH)
y
y
OPTION
INFORMATION
AUTO FLIP
MIRROR
REFRESH
PRESET
MENU
SET
ON
OFF
SET
OFF
BACK
L5BU2_XE(VCC-MC600P_MC500P)(GB).book 51 ページ ２００７年１月１８日 木曜日 午前９時４４分